Gemini flex 22kW electric vehicle charging station 3-phase, Type 2, connection cable 30cm and 32A CEE plug, CH-04-22-01

The go-e Charger Gemini flex 22kW with a maximum charging power of 22kW is a wallbox for charging electric cars that can also be converted into a mobile charging station in just a few seconds. The Charger is suitable for indoor and outdoor installation and can be connected directly to an existing red CEE 32 A three-phase socket. The go-e Charger charges electric cars and plug-in hybrids easily, quickly and safely. The go-e Charger Gemini flex 22kW offers numerous additional convenience functions via the go-e app.

• easy & can be installed without an electrician

• three phase charging

• Mains types: TT/TN/IT

• earthing test: For TT, TN mains (disconnectable earthing test for IT mains - Norway mode

• integrated DC protection module with DC detection and additional AC Detection (6 mA DC, 20 mA AC)

• temperature sensors (regulation of the charging current in case of overtemperature)

• RFID: 13.56 MHz ( 1xRFID chip already tuned in)

• WiFi: 802.11b/g/n 2.4GHz / frequency band 2412-2472Mhznt

App and connectivity

• Local (WiFi hotspot) or worldwide** (WiFi) control and monitoring

• Setting/checking the charge (voltage, current, power, energy)

• Adjustment of current level in 1 ampere steps

• Start/stop function

• RFID chip/card management (up to 10 users per charger) / access management (RFID/app)

• Charging timer

• Electricity meter (total kWh and total amount per RFID chip)

• kWh Limit Mode / Eco Mode** / Next Trip Mode**

• Push notifications**

• Cable release functions

• Flexible electricity tariffs with intelligent charging management**/***

• Static load balancing**

• Photovoltaic connection via go-e controller (separate product) or open API interface (programming required)**

• OCPP 1.6**

• LED adjustment

• Management of charging levels via push-button on charging station

• Updateable for later functions (Smart Home, etc.)**

• Automatic unlocking of the charging cable in case of power failure

• 1-/3-phase switching via app - even during the charging process

• Synchronisation of charging processes with the cloud and display of past charging processes**.

• Documented public API interfaces: HTTP, MQTT, Modbus TCP

**Internet connection of the charger required

***Contract required with an electricity provider whose flexible electricity tariff is integrated in the go-e app. Several 100 tariffs are stored. The number of tariffs is constantly being expanded.